Give your car’s paint a durable protective layer with Koch Chemie Ceramic Allround C0.02, a professional ceramic coating designed to create a highly hydrophobic, easy-to-clean surface while helping protect the paint from everyday environmental exposure.
At Fortify Car Care, we combine Koch-Chemie’s professional-grade coating with thorough paint preparation and precise application to help you get the most from your ceramic protection.
Koch Chemie Ceramic Allround C0.02 is a professional ceramic coating designed to form a very thin protective layer that chemically bonds with the treated surface. Once cured, it creates a highly hydrophobic surface with strong water-repelling and easy-to-clean properties.
For your car, this means more than simply adding gloss. The coating is designed to help protect the paint from environmental influences such as UV radiation, road salt, bird droppings and rust film, while making routine cleaning easier.
The result is a combination of surface protection, deep gloss and easier maintenance, making Ceramic Allround C0.02 a practical choice for owners who want to maintain their vehicle’s appearance over the long term.
A ceramic coating is only worth considering if it delivers benefits you can actually experience in everyday use. Ceramic Allround C0.02 is built around three important characteristics: protection, hydrophobicity and ease of maintenance.
One of the most noticeable characteristics of Ceramic Allround C0.02 is its hydrophobic behaviour. Water forms beads and rolls off the treated surface more readily, taking some loose dirt and contamination with it.
This water-repelling behaviour also makes the coated surface easier to clean by hand.
Your car’s paint is exposed to UV radiation, bird droppings, road salt, rust film and other environmental contaminants throughout its life.
The cured ceramic layer provides an additional protective barrier against these everyday influences, helping preserve the condition of the paint underneath.
Ceramic coating is not only about protection. It can also enhance the visual depth of your paint.
Ceramic Allround C0.02 creates a glossy finish that is designed to remain even after the use of acidic and alkaline cleaners within the manufacturer’s specified care parameters.
A hydrophobic, easy-to-clean surface means dirt and water are less likely to cling aggressively to the paint.
That can make routine hand washing simpler and help you spend less time fighting stubborn surface contamination.
Bangalore cars deal with a mixture of urban dust, road grime, intense sunlight, rain, bird droppings and everyday traffic contamination.
A ceramic coating cannot stop your car from getting dirty. What it can do is create a more resistant, easier-to-maintain surface that helps reduce how strongly everyday contaminants adhere to the paint.
For owners who want to maintain a freshly detailed appearance without constantly polishing or waxing their car, Koch Chemie ceramic coating offers a long-term approach to paint care.
It is particularly suited to owners who:
Koch-Chemie’s stated service life for Ceramic Allround C0.02 is approximately 20 to 24 months depending on the level of use and exposure. With a double coating, the stated service life increases to approximately 26 to 30 months.
Actual performance depends on factors such as how the vehicle is washed, the conditions it is exposed to and how well the coating is maintained.
This is why ceramic coating should not be viewed as a one-time application that requires no maintenance. Proper washing and aftercare play an important role in preserving the coating’s hydrophobic performance and appearance.
The coating itself is only one part of the result.
Before applying Koch Chemie Ceramic Allround C0.02, the paint needs to be properly cleaned, decontaminated and prepared. If the paint has existing swirl marks, oxidation or other defects, appropriate paint correction may also be required before the coating is applied.
Koch-Chemie’s own application guidance places significant emphasis on thorough preparation and removal of polishing residues before coating.
At Fortify Car Care, our process is built around the same principle: prepare the surface properly before protecting it.
We begin by assessing the current condition of your paint and identifying areas that may require additional preparation.
The exterior is thoroughly cleaned to remove surface dirt and embedded contaminants.
If the paint has swirl marks, fine scratches or oxidation, paint correction can be carried out before coating so that the finish underneath is in the best possible condition.
Polishing residues and oils need to be removed before the ceramic coating is applied. This ensures the coating has a properly prepared surface to bond with.
Ceramic Allround C0.02 is applied panel by panel under controlled conditions, followed by careful levelling and buffing.
The coating requires time to cure. Koch-Chemie’s guidance states that the coating becomes fully hardened after approximately nine days, while the vehicle should not be washed during this initial curing period.
Ceramic coating and Paint Protection Film serve different purposes.
Ceramic coating creates a thin protective layer that provides hydrophobicity, gloss and resistance to environmental contamination. PPF is a physical film designed to provide a stronger barrier against stone chips, deeper scratches and direct physical impact.
If your priority is gloss, hydrophobicity and easier maintenance, Koch-Chemie Ceramic Allround C0.02 is a strong ceramic coating option.
If your priority is maximum physical protection against stone chips and road debris, PPF may be more appropriate.
For some vehicles, combining both can make sense, with PPF protecting high-impact areas and ceramic coating providing easier maintenance and surface protection across suitable areas.
Good aftercare helps preserve the performance of the coating.
Koch-Chemie’s care guidance recommends gentle hand washing and appropriate cleaning products. The manufacturer also advises avoiding extremely acidic or alkaline cleaning products outside the recommended range.
At Fortify Car Care, we recommend:
A ceramic coating makes maintenance easier, but it does not make maintenance unnecessary.
At Fortify Car Care, ceramic coating is approached as a complete paint protection process rather than a quick application.
The condition of the paint, the quality of preparation, the application technique and the aftercare all influence the final result.
Our team focuses on getting the surface right before the coating goes on, because a ceramic coating should enhance and protect a well-prepared surface rather than hide existing paint defects.
From daily-driven cars to premium vehicles, we tailor the preparation and coating process according to the vehicle’s condition and your maintenance requirements.
Koch Chemie Ceramic Allround C0.02 is a professional ceramic coating designed to create a thin, chemically bonded protective layer. It provides a highly hydrophobic surface, easy-to-clean properties and a glossy finish while helping protect the paint from environmental influences.
Yes. Koch-Chemie lists exterior vehicle surfaces including painted surfaces, plastics and rims among the areas of use for Ceramic Allround C0.02.
The manufacturer’s stated service life is approximately 20 to 24 months depending on use and exposure. With a double coating, the stated service life increases to approximately 26 to 30 months. Proper washing and maintenance are important for preserving performance.
No. Ceramic coating should not be considered scratch-proof or a replacement for PPF. It provides a protective layer and can reduce the effects of certain environmental and light mechanical influences, but it cannot prevent damage from stone impacts, sharp objects or aggressive contact.
Yes. One of the key properties of Ceramic Allround C0.02 is its hydrophobic and easy-to-clean surface. Water and loose contamination can be removed more easily during proper hand washing.
Koch-Chemie states that complete hardening takes approximately nine days. The vehicle should not be washed during this initial curing period. The exact curing behaviour can also be affected by environmental conditions.
It can be applied, but it is generally better to correct significant paint defects before coating. Once the ceramic coating is applied, the existing condition of the paint remains visible underneath. Proper preparation therefore plays a major role in achieving the desired finish.
Ceramic coating and wax serve different purposes. Wax provides short-term surface protection and gloss, while a professional ceramic coating creates a chemically bonded protective layer designed for significantly longer-term performance. Ceramic Allround C0.02 also provides hydrophobic and easy-to-clean properties.
The product is designed for professional application and requires careful paint preparation, controlled application and correct curing. Koch-Chemie’s application guidance places particular emphasis on surface preparation and application technique.
Your car’s paint deserves more than occasional polishing when it starts looking dull.
With Koch Chemie All Around Ceramic Coating, you can add a professional protective layer designed to maintain gloss, repel water and make everyday cleaning easier.
Let Fortify Car Care prepare, coat and protect your vehicle with a process focused on the condition of the paint and the quality of the final finish.
